Reloading gear for rifle and Bowpress/archery equipment.

[MT_mulies]

Hey guys,
I'm really wanting to get into reloading for my guns. I have a .270, .243, and .223 that I shoot the most. I also have a .357 handgun. I'm just getting into the gear hunt. What is the best beginner set up out there? I know I'm going to be into it $300 and up. I would like to get into some quality stuff for around $700 ish. Including, powder, dyes, press, manauls, bullets, ect.


Also I want to get set up so that I can do all my own archery repairs and maintenance. What are some things that I should start out with and the brand names? I'm looking for bow press, arrow fletcher, arrow cutter, ect. Any help would be great. Thanks

 

[cowboystl1]

RCBS reloading stuff if you watch there will be combo sales you can get your press and some extras with it. i like the rock chucker press my self. im a fand of horday bullets and powder


bow make your own arrow cutter DIY you tube press that 300 or watch ebay arizona eazy fletcher is pretty simple and cheap to start with

 

[ILbowhntr]

X2 on the RCBS press and dies. I have 2 presses, do a lot of loading. Built my setup over the years, but a RCBS boxed kit is a great way to start. DO NOT trust your powder drop to be spot on every time. I weigh every charge that goes in a case. Never had a misfire.

 

[MT_mulies]

Alright guys I'm buying a RCBS rock chucker supreme kit this weekend.
I'm buying it used. Can you guys let me know if there is more needed or if everything listed will get me started?
It comes with the normal Cabelas kit equipment and
powder trickles
caliper
case gauge
powder stand
pilots
neck brush
cartridge holder
loading manual

and I will be buying powder and bullets as needed. Is there anything else that I HAVE to get in order to start?